The electrical system in a home or apartment is a complex arrangement of wires, outlets, switches and load breakers. To make things work properly without overloading any given space, the circuit load is divided into several areas. For instance, the smaller outlets in the kitchen will probably be on an individual circuit, and the GFIC (Ground Fault Interrupt Circuits) may be on a second breaker. Larger appliances should have their own circuits since some use higher voltages.
Segregating the power in this way allows power faults in some parts of the home without completely disrupting the flow of electricity in others. To ensure that everything functions properly, a Residential Electrician in Doylestown, PA, will estimate how much power each space will require at peak demand and how large the circuit breaker should be.
Breaker size is important because it determines the draw of electricity throughout the overall circuit. Wiring is rated at specific loads, and too much power flow can cause them to overheat. Breaker sizes vary as well, but the most common for typical rooms is twenty or thirty amperes. It is important that these breakers are not improperly sized, or they cannot perform the task of shutting of a dangerous electrical circuit.
One of the most common reasons to hire a Residential Electrician in Doylestown, PA, is the expansion of the home. It is important to do this properly because adding a circuit capable of high loads could cause an extreme fire hazard if the appliance pulls too much amperage. This is actually one of the largest causes of home fire outside of arson.
Perhaps the most neglected function performed by most electricians is an inspection. Most folks have their home inspected when they buy it and then forget about potential problems. This is a shame because electrical components can degrade over time which makes them more resistant to the flow of power. This means that as electricity flows through the metal, it generates more heat. Think about it this way, an electric oven or stove uses electrical resistance to heat elements. When the components in your home degrade, they could be heating up the building in the same way. To learn more, contact the experts at Nalset Electrical Services.